3.8 Manufacture of aluminium (climate change mitigation)

Kurzbeschreibung

Manufacture of aluminium through primary alumina (bauxite) process or secondary aluminium recycling. The economic activities in this category could be associated with NACE code C24.42, C24.53 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006. An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section. ___________ ( 101 ) Calculated in accordance with Regulation (EU) 2019/331. ( 102 ) Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO 2 equivalents/t) for grey cement clinker as set out in the Annex to the Implementing Regulation (EU) 2021/447, multiplied by the clinker to cement ratio of 0,65. ( 103 ) Commission Implementing Decision 2013/163/EU of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (OJ L 100, 9.4.2013, p. 1). ( 104 ) See Best Available Techniques Reference Document (BREF) on Economics and Cross-Media Effects (version of 4.6.2021: https:// eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/ecm_bref_0706.pdf).

Wirtschaftsaktivität (EU-Taxonomie)

Rechtsakt: 2021/2139, Anhang I, Abschnitt 3.8 · MANUFACTURING

Umweltziel: climate change mitigation

NACE-Codes: C24.42, C24.53

Beschreibung

Manufacture of aluminium through primary alumina (bauxite) process or secondary aluminium recycling. The economic activities in this category could be associated with NACE code C24.42, C24.53 in accordance with the statistical classification of economic activities established by Regulation (EC) No 1893/2006. An economic activity in this category is a transitional activity as referred to in Article 10(2) of Regulation (EU) 2020/852 where it complies with the technical screening criteria set out in this Section. ___________ ( 101 ) Calculated in accordance with Regulation (EU) 2019/331. ( 102 ) Reflecting the average value of the 10 % most efficient installations in 2016 and 2017 (t CO 2 equivalents/t) for grey cement clinker as set out in the Annex to the Implementing Regulation (EU) 2021/447, multiplied by the clinker to cement ratio of 0,65. ( 103 ) Commission Implementing Decision 2013/163/EU of 26 March 2013 establishing the best available techniques (BAT) conclusions under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions for the production of cement, lime and magnesium oxide (OJ L 100, 9.4.2013, p. 1). ( 104 ) See Best Available Techniques Reference Document (BREF) on Economics and Cross-Media Effects (version of 4.6.2021: https:// eippcb.jrc.ec.europa.eu/sites/default/files/2019-11/ecm_bref_0706.pdf).

Technische Bewertungskriterien

Technical screening criteria Substantial contribution to climate change mitigation The activity manufactures one of the following: (a) primary aluminium where the economic activity complies with two of the following criteria until 2025 and with all of the following criteria ( 105 ) after 2025: (i) the GHG emissions ( 106 ) do not exceed 1,484 ( 107 ) tCO 2 e per ton of aluminium manufactured ( 108 ): (ii) the average carbon intensity for the indirect GHG emissions ( 109 ) does not exceed 100 g CO 2 e/kWh; (iii) the electricity consumption for the manufacturing process does not exceed 15,5 MWh/t Al. (b) secondary aluminium. Do no significant harm (‘DNSH’) (2) Climate change adaptation The activity complies with the criteria set out in Appendix A to this Annex. (3) Sustainable use and protection of water and marine resources The activity complies with the criteria set out in Appendix B to this Annex. (4) Transition to a circular economy N/A (5) Pollution prevention and control The activity complies with the criteria set out in Appendix C to this Annex. Emissions are within or lower than the emission levels associated with the best available techniques (BAT-AEL) ranges set out in the latest relevant best available techniques (BAT) conclusions, including the best available techniques (BAT) conclusions for the non-ferrous metals industries ( 110 ). No significant cross-media effects occur. (6) Protection and restoration of biodiversity and ecosystems The activity complies with the criteria set out in Appendix D to this Annex.